The five-group disc polisher is an efficient polishing equipment. Structurally, it has five polishing discs. These discs can be installed with polishing materials of different coarseness and fineness, such as coarse sand polishing wheels, fine sand polishing wheels, etc. When working, the metal workpiece will pass through these discs in turn under the drive of the machine, realizing the process from rough polishing to fine polishing.
In terms of application, this polisher is suitable for batch polishing of a large number of metal workpieces. For example, in a hardware processing factory, for small metal parts such as screws and nuts produced in batches, the five-group disc polisher can quickly polish their surfaces and improve production efficiency. Moreover, it can handle a variety of relatively regular metal parts. By adjusting the contact method and time between the workpiece and the disc, it can also perform better polishing on workpieces in the shape of cylinders, round tubes, etc.
1. Efficient polishing capability
The five-set disc design allows the polishing process to be carried out in multiple steps at the same time. For example, the first disc can be used for rough polishing to remove most of the defects and oxide layers on the workpiece surface; the subsequent discs can be used for medium polishing and fine polishing to quickly polish the workpiece surface to a bright finish. This multi-step continuous polishing method greatly improves the polishing efficiency and is particularly suitable for mass production.
2. Good polishing quality
Due to the multiple polishing stages, the workpiece surface can be finely processed. By using suitable polishing materials on different discs, such as grinding discs of different particle sizes, the workpiece can obtain better surface flatness and finish, meet various surface quality requirements, and achieve mirror polishing effects.
3. Wide range of applications
It can handle a variety of relatively regular metal workpieces, including cylindrical, tubular, etc. For metals of different materials, such as stainless steel, carbon steel, aluminum alloy, etc., as long as the polishing parameters (such as speed, polishing materials, etc.) are adjusted, effective polishing can be performed.
4. Operational flexibility
Each disc can be independently installed with different types of polishing materials, and the operator can flexibly configure it according to the specific workpiece material and polishing requirements. For example, for metal workpieces with higher surface hardness, more wear-resistant polishing materials can be installed on the front disc to adapt to the high-intensity grinding in the rough polishing stage.
5. Stable working performance
This type of polishing machine generally has a reasonable structural design and the rotation of the disc is relatively stable. The power system such as the motor can also provide continuous and stable power to ensure the uniformity of the polishing process and reduce polishing defects caused by factors such as machine jitter.
6. High degree of automation
It is easy to combine with the automated conveying system to realize automatic feeding, polishing and discharging of workpieces. This can reduce manual operation and labor intensity, and at the same time improve the consistency and stability of the production process.
| Origin: | Guangdong, China |
| Condition: | Brand new |
| Shipment video inspection: | Provided |
| Mechanical test report: | Provided |
| Sales type: | General products |
| Core component warranty: | 1 year |
| Core components: | PLC, motor |
| Power (kW): | 7.5 |
| Weight (KG): | 2000 |
| Main selling point: | Easy to operate |
| Warranty: | 1 year |
| Applicable industry: | Manufacturing plant |
| Showroom location: | None |
| Brand: | Zhuosheng |
| Article number: | 2020131 |
| Model: | ZS-YP-1000 |
| Power type: | AC power supply |
| Power supply voltage: | 380V |
| Polishing wheel diameter: | 420 (mm) |
| No-load speed: | 1900 (rpm) |
| Speed: | 1900 (rpm) |
| Disk diameter: | 1000 (mm) |
| Specifications and dimensions: | 4500x1500x1900 (mm) |
| After-sales service provided: | Video technical support |
1. Non-standard customization: meet personalized technical requirements.
2. Samples and drawings: professional R&D team design.
3. Flexible payment: T/T, LC, international bank.
4. Video factory inspection: can be scheduled.
5.Experienced professional sales service team.
6. Visual production process.
1. Provide circuit diagrams, maintenance manuals,full-course teaching videos and other materials required.
2. Full-time after-sales service, cooperate with customers to inspect, install and test.
3. Quick response: respond within 24 hours if there are any problems with the customers use.
The five-group disc polishing machine is suitable for the processing of a variety of metal products.
In the hardware industry, it is used to polish various hardware small accessories, such as screws, nuts, gaskets, etc. These small parts are numerous and relatively small in size. Through batch processing by the machine, their surface finish can be quickly improved.
It is also suitable for metal pipes and bars, such as stainless steel pipes, copper bars, etc. The machine can effectively polish its surface, remove the burrs generated by the pipes and bars during cutting and processing, make its appearance smoother, and achieve better decorative and practical effects.
In the field of automotive parts manufacturing, it can be used for polishing some regular-shaped automotive accessories, such as some metal shafts, round automotive interior small parts, etc., which can meet the automotive industry's high requirements for the surface quality of parts.
In addition, in the production of daily metal products such as stainless steel tableware, metal door handles, etc., the five-group disc polishing machine can also play a role, making the surface of these products brighter and improving the appearance quality of the products.
We are grateful for your support and trust along the way. We are honored by your cooperation every time, and we will live up to your trust and provide you with a more excellent experience.
We can also help you with all your equipment packaging needs. Whether you need split packaging, certified materials or general packaging advice, our team of experts can help you. We understand that every business is different, so we tailor our services to your needs. Our goal is to make your life easier by meeting all your packaging needs so that you can focus on running your business.
As a professional mechanical equipment manufacturer, our company is a private technology innovation enterprise integrating independent research and development, design and manufacturing, installation and commissioning, and training.
Our R&D team has 10 people, whose members cover multiple professional fields such as mechanical engineering, electronic information, and materials science, and have the ability to deal with different technical problems.
Our equipment is widely used in aerospace, energy, ventilation,hardware and furniture, tableware, medicine, electricity, packaging,construction,automobile and other industries and fields.
Q: When shipping, what kind of packing?
A: We use standard export packing.
Q: What are your delivery terms?
A: EXW, FOB, CFR, CIF.
Q: What's your delivery time?
A: Generally speaking, it takes 30 to 60 days after receiving your advance payment. The specific delivery time depends on the item and quantity of your order.
Q: Can you make it as required?
A: Yes, we can produce according to your samples or technical drawings. We can make molds and fixtures.
Q: Do you have professional engineers?
A: Yes.we have professional engineers and designers.
Q: Can you provide customzied machines?
A:Yes, we can design and manufacture according to your specific requirements.
